Gypsum ceiling cost per m² in Riyadh and Dubai: what drives the price
A flat gypsum ceiling costs about SAR 45–110 per m² in Riyadh and AED 70–150 in Dubai. See what coves, board type, lighting and extras add to the price.
A flat gypsum board ceiling costs about SAR 45–110 per m² in Riyadh and AED 70–150 per m² in Dubai, supplied and installed. A drop with a hidden LED cove, or several levels, can double or triple that. The design, the board type, the lighting and what the quote leaves out decide where your ceiling lands in the range.
A flat ceiling is one level of board on a metal frame, taped and sanded ready for paint. It is the cheapest option in both cities.
A drop (a lowered band around the room) with a cove for a hidden LED strip needs more framing, more corners and more finishing. In Dubai, published rates move from AED 70–150 to AED 90–240 per m². Multi-level, curved or majlis ceilings with several drops and decorative details sit at the top: SAR 120–180 per m² in Riyadh and from AED 120 up to AED 375 per m² in Dubai.
Cornices are priced by the running metre: about SAR 40–80 per metre in Riyadh.
2. The board: standard, green or fire-rated
The board itself is a small part of the bill. A standard 12.5 mm sheet of 1.2 × 2.4 m (2.88 m²) costs about AED 16–20 in the UAE and SAR 22–28 in Saudi Arabia.
Standard board (white or grey): bedrooms, living rooms, majlis.
Moisture-resistant board (green): bathrooms and kitchens. In Dubai it adds about AED 10–20 per m² to the installed price. In Riyadh, a green-board ceiling runs about SAR 60–105 per m².
Fire-rated board (pink or red): kitchens, areas near the electrical panel and some commercial spaces. Dubai adds about AED 15–25 per m²; a Riyadh guide gives SAR 70–85 per m² for a fire-rated ceiling.
3. The frame you can't see
The frame carries the ceiling. A 2026 Saudi price guide quotes flat ceilings on a galvanized steel frame of about 0.45–0.50 mm, with Knauf or Mada boards. A thinner frame or an unknown brand makes a lower price easy. Ask for the frame thickness and the board brand in writing.
4. Lighting and electrical work
Lighting is often a separate line, so compare it separately. Published Dubai rates:
LED cove strip: AED 30–90 per running metre
Recessed downlight: AED 50–150 per point, depending on what electrical work is included
Plan every light point before the boards go up. Adding spotlights later means cutting and patching a finished ceiling.
5. Height, size and access
Height: in Riyadh, each step above 3 m adds about 10–15%. Double-height villa lounges need scaffolding, which you pay for.
Small rooms cost more per m², because the crew's minimum charge is spread over less area.
Towers in Dubai: some buildings ask for an approved work schedule, and tenants need the landlord's permission in writing.
6. What the quote leaves out
Two quotes at the same rate can end very differently. Check each line:
Paint: AED 8–15 per m² in Dubai if not included
Access panels: AED 120–250 each in Dubai. Plan one wherever a concealed AC unit or valve needs servicing.
Removing an old ceiling: AED 15–30 per m² in Dubai
VAT: 15% in Saudi Arabia, 5% in the UAE
Example: a 5 × 4 m bedroom
Flat ceiling, standard board, 4 downlights, painted. Area: 5 × 4 = 20 m².
With 5% VAT: 1,880 × 1.05 = AED 1,974 to 3,900 × 1.05 = AED 4,095
Riyadh
Ceiling: 20 × SAR 45 = SAR 900 to 20 × SAR 110 = SAR 2,200
With 15% VAT: 900 × 1.15 = SAR 1,035 to 2,200 × 1.15 = SAR 2,530, before paint and light points
The same room with a cove drop: 20 × SAR 85 = SAR 1,700 to 20 × SAR 250 = SAR 5,000 in Riyadh, or 20 × AED 90 = AED 1,800 to 20 × AED 240 = AED 4,800 in Dubai, before extras.
Planning the whole room? The renovation estimator gives a first budget, and the paint calculator tells you how much paint the new ceiling needs.
How to get a reliable price
Measure each room (length × width) and note the ceiling height.
Choose the design per room: flat, drop with cove, or multi-level. Mark wet rooms for green board.
Mark every light point, AC unit and valve on a simple plan, so access panels and lights are priced from day one.
Ask what is included: frame thickness, board brand, paint, electrical work, removal, VAT.
Get 3 quotes from verified ceiling and fit-out pros: post your job for free and compare them line by line.