Roof waterproofing before the rains: what to check
A 10-point roof check before the rains, the main waterproofing systems with prices per m² in Saudi Arabia and the UAE, and what a good quote must include.
Waterproofing a flat villa roof costs about SAR 25–65 per m² in Riyadh and AED 35–120 per m² in Dubai, depending on the system and what the contractor includes. Before you pay anything, spend an hour on the roof: most leaks start at a blocked drain, a crack or a badly finished edge. This season matters: the National Center for Meteorology expects above-normal rain over most of Saudi Arabia in November 2026.
10 checks to do on your roof now
Go up on a dry day with a torch and your phone, and take photos of anything you find.
Drains and gutters. Remove sand, leaves and plastic. A blocked drain turns the roof into a pool.
Puddles after the last rain. Water still standing a day after rain means the slope to the drains is wrong.
Cracks in the screed, tiles or grout, especially near walls and around the water tank.
The membrane edges. Where it is visible, look for joints that lift, blisters, tears or bare patches.
Upstands at parapets and walls. The waterproofing should turn up the wall at least 15 cm above the finished roof, and its top edge should be sealed or covered.
AC bases, pipes and cables that cross the roof. Every hole through the waterproofing is a weak point: check the seal around each one.
The water tank and its stand. Leaks and overflow from the tank wet the roof every day.
Doors and thresholds to the roof and to the stair room (al-mulhaq): water should not be able to run inside.
Ceilings and walls on the top floor. Damp stains, bubbling paint or white salt marks show where water is already getting in.
The paperwork. Find your waterproofing warranty and the contractor's name. A leak within the warranty period should be repaired at their cost.
Seamless; can stay exposed with a UV-resistant top coat; good around AC bases and pipes
PVC membrane
55 – 90
—
Mostly used on large roofs
Cementitious coating
—
25 – 50
Low cost; for small or shaded roofs
Example: a 200 m² villa roof in Riyadh
Bitumen membrane: 200 m² × SAR 25–45 = SAR 5,000–9,000
PU liquid membrane: 200 m² × SAR 35–65 = SAR 7,000–13,000
Extra if needed: removing the old layers, repairing cracks, the protection screed and the tiles
Repairing a small area is cheaper, but if the old waterproofing has failed in several places, a full new layer is often the safer choice. Ask your contractor to show you why.
What a good quote must include
Removal of the failed layers and repair of the slab
Correcting the slope so water reaches the drains
Upstands at least 15 cm up every wall and parapet, with a sealed top edge
Detailing around every drain, pipe, AC base and the water tank stand
A flood test of at least 24 hours (48 is better) before the screed or tiles go on
The protection layer, if the system needs one
A written warranty with its duration
When to do the work
Before the rains is ideal, but autumn is the busiest season for waterproofing contractors, so book early. Liquid coatings need dry weather and moderate temperatures to cure, and torch-on bitumen should not be laid in rain or strong wind. If the rains have already started, fix the urgent leaks now and plan the full job for a dry period.
Compare prices in our home services price guide, then ask 3 waterproofing contractors to quote on the same list.
Prices are indicative ranges, last updated Nov 5, 2026. The final price depends on the site, the materials and the pro.